Q1 Stand Up For Safety

March 23, 2018 | By: Jessica Helmer

The week of 3/19/18-3/23/18 has been designated as ATD’s Q1 2018 “ATD Stands Up For Safety” week. Four times a year, ATD superintendents and foremen along with the safety department conduct a series of special safety training sessions out on our jobsites on relevant safety and health topics. These special meetings are designed to be more comprehensive and interactive than just a tool box talk. Crew members participate in the meetings, and each ATD employee who attends is given a small token of our appreciation for their ongoing commitment to safety.

In conjunction with National Ladder Safety Month, the topic for Q1 2018’s meetings is “Ladder Safety” and the end of the week we conducted 29 meetings for 125 employees.


Final Fit Testing

March 12, 2018 | By: Jessica Helmer

Saturday, March 3rd was our final session of the scheduled annual fit testing that was held in the Hastings Learning Center. ATD’s safety team trained and properly educated our field employees on all important respiratory needs. All field employees wore their proper masks and hard hats for the formal training. A big thanks to our SAFETY TEAM for spending the last 3 Saturday mornings completing this OSHA requirement. Thanks also to all of the Superintendents who attended and assisted in these sessions. This was a complete TEAM effort by everyone.


Respirator Fit Testing & Graco Pump Training

February 17, 2017 | By: Jessica Helmer

Following our respirator class Graco’s Justin Kulik conducted an outstanding training session of how to properly use, maintain, troubleshoot, and repair our expensive pumps. Justin is an excellent trainer and explained several techniques and practices that are necessary to avoid abusing our equipment.


Ace Mentorship Program

February 15, 2018 | By: Jessica Helmer

All-Tech attended the annual ACE mentorship luncheon on Thursday Feb 15th! The ACE Mentor Program of America, Inc. (ACE) helps mentor high school students and inspires them to pursue careers in design and construction.

Tapers Meeting

February 13, 2018 | By: Jessica Helmer

We held a 3-hour “Tapers Only Meeting” in the Hastings Center.

We had discussions and demonstrations with application boxes, a bazooka, stilts, pumps, a vacuum sander, and a HEPA vac. The first photo is of taper Matt Vazquez enthusiastically demonstrating a special sponge head to use on the vacuum sander to make it perform higher quality work.

We also talked about the results of the recent personal air monitoring Brittany performed on two tapers that were pole and hand sanding for several hours

OSHA requires contractors to conduct personal air monitoring for operations that may generate harmful amounts of silica dust or respirable dusts in general. We purposely chose a day when the tapers had several hours of sanding to do so we could sample for as much of a “worst case scenario” as possible. We are pleased to report that the levels of silica dust were well below OSHA limits. The second photo is taper Jesse Hernandez sanding at with the air sampling pump on his waist.

On the safety side, we reviewed the major hazards and control measures for tapers: fall protection, guardrails, open holes, slips/trips/falls, rolling scaffold use, ladder use, proper inspection of the worksite, electrical safety, and ergonomics/materials handling.